Lock the material identity
Write the UNS or EN grade and product standard on the enquiry.
Manufactured in Gujarat · India-wide supply · Export enquiries
Copper-Nickel 70/30 Pipes and Tubes Manufacturer in India
Identify C71500 or the weldable grade, construction, wall system and inspection scope before requesting price.
SpecificationASTM B466 · B467 · B111, selected by product formGradeUNS C71500 / C71520 · CuNi30Mn1Fe · CW354HSupply reference10.3–610 mm OD · 1.24–25 mm wall referenceConditionO60 · H55 / H80
Specification-led brass supply
Choose the alloy around the service, then define the order.
Copper-nickel 70/30 commonly refers to UNS C71500, with nickel, iron and manganese controlled for demanding seawater and heat-transfer duties.
C71520 may be specified for welded construction. The grade, construction and governing product standard must appear together on the drawing and purchase order.
A clearer route to purchase
Remove uncertainty before commercial comparison.
Define manufacturable dimensions
State OD or nominal size, wall, length, tolerances and form.
Set evidence requirements
Identify MTC, examination, marking and inspection before quotation.
Configure it visually
Use the 3D builder to organise the product and purchasing data.
Technical specification
Copper-Nickel 70/30 Pipes and Tubes reference data
Use this summary to prepare the enquiry. The accepted quotation, purchase specification and current governing-standard edition control the order.
Published ranges are enquiry references, not a live-stock promise. Confirm each size, temper, test and document in the supplier’s written quotation.
3D product configuration
Prepare a complete technical enquiry.
Open the builder with Copper-Nickel 70/30 Pipes and Tubes selected. Add dimensions, condition, quantity and destination, then include the governing standard, required tests and documentation in the RFQ.
Identify
Alloy, standard, edition and intended service.
Define
Dimensions, tolerance, temper, form and finish.
Approve
Tests, MTC, inspection, packing and destination.
Selection by duty
Connect the alloy to the real operating requirement.
Offshore and marine systems
Material and wall class matched to pressure, velocity and project requirements.
Condenser tubing
ASTM B111 dimensions, temper and examination stated for heat-transfer service.
Desalination plant piping
Water conditions and fabrication details reviewed before alloy confirmation.
Firewater and process cooling
Pipe, fittings, flanges and joining procedure specified as an approved system.
Engineering selection
Application examples do not establish fitness for service. Confirm medium, composition, velocity, temperature, pressure, fabrication, environment and governing code with the responsible engineer.
India and export enquiries
One technical page for buyers across major markets.
We review enquiries from major Indian cities and international industrial markets. Geographic coverage does not imply local inventory, office presence or certification.
01
Supply enquiries
India
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Mumbai
- Ahmedabad
- Pune
- Chennai
- Hyderabad
- Bengaluru
02
Supply enquiries
Middle East
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- UAE
- Saudi Arabia
- Qatar
- Oman
- Kuwait
- Bahrain
03
Supply enquiries
Africa
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- South Africa
- Egypt
- Nigeria
- Kenya
- Ghana
- Tanzania
04
Supply enquiries
Asia & Europe
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Singapore
- Malaysia
- Indonesia
- Philippines
- Germany
- Italy
Cu-Ni 70/30 and C71500 tube
Keep C71500 material identity tied to service and inspection.
C71500 tubing
Identify UNS C71500 or Cu-Ni 70/30, the governing tube standard, dimensions, condition and required material certification.
Condenser tube
For condenser and heat-exchanger duty, provide tube-sheet data, length, tolerances, end condition and test requirements.
Marine and offshore piping
State the design code, seawater conditions, pressure, temperature, pipe or tube dimensions and fabrication scope.
Alloy comparison
Do not substitute 70/30 and 90/10 copper-nickel grades by name alone; the system designer must select the alloy for the operating environment.
Quality and order definition
Make acceptance criteria traceable.
State certificate type, test method, sampling or 100% examination, marking, inspection hold points and acceptance criteria before order placement.
View quality and testing capabilities →- 01
MaterialGrade, standard and edition
- 02
DimensionsSize, tolerance and length
- 03
ConditionTemper, form, finish and ends
- 04
EvidenceMTC, testing and inspection
- 05
DeliveryQuantity, packing and destination
Before requesting a quotation
Frequently asked questions about Copper-Nickel 70/30 Pipes and Tubes
What is C71500?+
UNS C71500 is commonly called copper-nickel 70/30, CuNi30Mn1Fe or CW354H.
How does C71520 differ?+
C71520 is a weldable copper-nickel grade used for applicable welded product. Do not substitute it for C71500 without approval.
Which standards apply?+
ASTM B466 covers applicable seamless pipe, B467 welded pipe and B111 condenser or heat-exchanger tube.
What dimensions can be reviewed?+
Published supply references extend from about 10.3 to 610 mm OD and 1.24 to 25 mm wall; actual combinations depend on construction, standard, quantity and tooling.
Copper-Nickel 70/30 Pipes and Tubes enquiry
Request a quotation based on the actual requirement.
Send grade, standard and edition, dimensions, temper, quantity, tests, inspection and destination.
Manufacturing, testing, certification and delivery scope is confirmed in writing before order acceptance.