Lock the material identity
Write the UNS or EN grade and product standard on the enquiry.
Manufactured in Gujarat · India-wide supply · Export enquiries
Automotive Copper-Nickel Brake Tubes Manufacturer in India
Brake tubing is safety-critical: provide the vehicle or system standard, tube dimensions, coating, flare and validation requirements.
SpecificationSAE J1650 / ISO 4038 when specified by the buyerGradeCuNi10Fe1Mn / approved automotive CuNi gradeSupply referenceOD, wall, coil length and tolerance to vehicle specificationConditionFormable tube condition by approved requirement
Specification-led brass supply
Choose the alloy around the service, then define the order.
Automotive copper-nickel brake tubing is selected for formability and corrosion resistance in hydraulic brake-line systems. The finished tube and assembly must follow the vehicle manufacturer or applicable automotive specification.
Do not purchase brake tube from alloy name alone. OD, wall, condition, surface or coating, cleanliness, burst and pressure tests, flare geometry and end fittings are part of the safety requirement.
A clearer route to purchase
Remove uncertainty before commercial comparison.
Define manufacturable dimensions
State OD or nominal size, wall, length, tolerances and form.
Set evidence requirements
Identify MTC, examination, marking and inspection before quotation.
Configure it visually
Use the 3D builder to organise the product and purchasing data.
Technical specification
Automotive Copper-Nickel Brake Tubes reference data
Use this summary to prepare the enquiry. The accepted quotation, purchase specification and current governing-standard edition control the order.
Published ranges are enquiry references, not a live-stock promise. Confirm each size, temper, test and document in the supplier’s written quotation.
3D product configuration
Prepare a complete technical enquiry.
Open the builder with Automotive Copper-Nickel Brake Tubes selected. Add dimensions, condition, quantity and destination, then include the governing standard, required tests and documentation in the RFQ.
Identify
Alloy, standard, edition and intended service.
Define
Dimensions, tolerance, temper, form and finish.
Approve
Tests, MTC, inspection, packing and destination.
Selection by duty
Connect the alloy to the real operating requirement.
Passenger vehicle brake lines
Tube and flare geometry matched to the approved vehicle specification.
Commercial vehicle systems
Pressure, vibration, routing and corrosion tests defined by the OEM.
Restoration and replacement kits
Dimensions and end connections verified against the original system.
Preformed brake assemblies
Bending, protective features and identification controlled from drawing to packing.
Engineering selection
Application examples do not establish fitness for service. Confirm medium, composition, velocity, temperature, pressure, fabrication, environment and governing code with the responsible engineer.
India and export enquiries
One technical page for buyers across major markets.
We review enquiries from major Indian cities and international industrial markets. Geographic coverage does not imply local inventory, office presence or certification.
01
Supply enquiries
India
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Mumbai
- Ahmedabad
- Pune
- Chennai
- Hyderabad
- Bengaluru
02
Supply enquiries
Middle East
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- UAE
- Saudi Arabia
- Qatar
- Oman
- Kuwait
- Bahrain
03
Supply enquiries
Africa
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- South Africa
- Egypt
- Nigeria
- Kenya
- Ghana
- Tanzania
04
Supply enquiries
Asia & Europe
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Singapore
- Malaysia
- Indonesia
- Philippines
- Germany
- Italy
Quality and order definition
Make acceptance criteria traceable.
State certificate type, test method, sampling or 100% examination, marking, inspection hold points and acceptance criteria before order placement.
View quality and testing capabilities →- 01
MaterialGrade, standard and edition
- 02
DimensionsSize, tolerance and length
- 03
ConditionTemper, form, finish and ends
- 04
EvidenceMTC, testing and inspection
- 05
DeliveryQuantity, packing and destination
Before requesting a quotation
Frequently asked questions about Automotive Copper-Nickel Brake Tubes
Can ordinary C70600 tube be used as a brake line?+
Do not assume so. Automotive brake tubing must comply with the applicable vehicle or tube standard, dimensions, condition, surface, tests and end-connection requirements.
Which standards may be specified?+
SAE J1650 and ISO 4038 are examples used for applicable copper-nickel brake tubing. Follow the exact OEM or market requirement.
What should a brake-tube RFQ include?+
Provide standard and edition, alloy, OD, wall, coil or straight length, coating, cleanliness, flare, fittings, test plan, quantity and vehicle application.
Can pre-flared assemblies be reviewed?+
Yes, when a controlled drawing defines tube route, lengths, bend radii, flare type, fittings, protection and inspection criteria.
Automotive Copper-Nickel Brake Tubes enquiry
Request a quotation based on the actual requirement.
Send grade, standard and edition, dimensions, temper, quantity, tests, inspection and destination.
Manufacturing, testing, certification and delivery scope is confirmed in writing before order acceptance.