Lock the material identity
Write the UNS or EN grade and product standard on the enquiry.
Manufactured in Gujarat · India-wide supply · Export enquiries
Brass Tubes and Pipes Manufacturer in India
Select the brass alloy, governing standard and dimensions before comparing price, lead time or origin.
SpecificationASTM B135 · B111, selected by grade and serviceGradeC26000 · C27200 · C44300 · C68700 · C46400Supply referenceOD, wall and length to grade, standard and orderConditionAnnealed or drawn, subject to grade
Specification-led brass supply
Choose the alloy around the service, then define the order.
Brass is a family of copper-zinc alloys. Copper-zinc ratio and additions such as tin, aluminium or inhibitors change strength, fabrication behaviour and resistance in particular water conditions.
Use this page to identify the product family. The alloy-specific page should carry the final grade, standard, temper, dimensions, testing and acceptance criteria.
A clearer route to purchase
Remove uncertainty before commercial comparison.
Define manufacturable dimensions
State OD or nominal size, wall, length, tolerances and form.
Set evidence requirements
Identify MTC, examination, marking and inspection before quotation.
Configure it visually
Use the 3D builder to organise the product and purchasing data.
Technical specification
Brass Tubes and Pipes reference data
Use this summary to prepare the enquiry. The accepted quotation, purchase specification and current governing-standard edition control the order.
Published ranges are enquiry references, not a live-stock promise. Confirm each size, temper, test and document in the supplier’s written quotation.
3D product configuration
Prepare a complete technical enquiry.
Open the builder with Brass Tubes and Pipes selected. Add dimensions, condition, quantity and destination, then include the governing standard, required tests and documentation in the RFQ.
Identify
Alloy, standard, edition and intended service.
Define
Dimensions, tolerance, temper, form and finish.
Approve
Tests, MTC, inspection, packing and destination.
Selection by duty
Connect the alloy to the real operating requirement.
General engineering
Drawn tube for fabricated parts, assemblies and general industrial requirements.
Heat-transfer equipment
Alloy and tube standard selected for condenser or heat-exchanger duty.
Architectural and interior work
Surface, straightness and finish defined for visible fabricated components.
Project and export supply
Documentation, inspection, marking, packing and destination agreed with the order.
Engineering selection
Application examples do not establish fitness for service. Confirm medium, composition, velocity, temperature, pressure, fabrication, environment and governing code with the responsible engineer.
India and export enquiries
One technical page for buyers across major markets.
We review enquiries from major Indian cities and international industrial markets. Geographic coverage does not imply local inventory, office presence or certification.
01
Supply enquiries
India
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Mumbai
- Ahmedabad
- Pune
- Chennai
- Hyderabad
- Bengaluru
02
Supply enquiries
Middle East
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- UAE
- Saudi Arabia
- Qatar
- Oman
- Kuwait
- Bahrain
03
Supply enquiries
Africa
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- South Africa
- Egypt
- Nigeria
- Kenya
- Ghana
- Tanzania
04
Supply enquiries
Asia & Europe
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Singapore
- Malaysia
- Indonesia
- Philippines
- Germany
- Italy
Quality and order definition
Make acceptance criteria traceable.
State certificate type, test method, sampling or 100% examination, marking, inspection hold points and acceptance criteria before order placement.
View quality and testing capabilities →- 01
MaterialGrade, standard and edition
- 02
DimensionsSize, tolerance and length
- 03
ConditionTemper, form, finish and ends
- 04
EvidenceMTC, testing and inspection
- 05
DeliveryQuantity, packing and destination
Before requesting a quotation
Frequently asked questions about Brass Tubes and Pipes
Which brass grade should I specify?+
Choose by service, fabrication method and governing standard. C26000 and C27200 serve general engineering and forming requirements; C44300, C68700 and C46400 address different heat-transfer or marine-related specifications.
Are brass tube and brass pipe interchangeable?+
No. Product terminology and dimensions vary by standard. State the governing specification, OD or nominal size, wall, length and tolerance.
What must appear on the RFQ?+
Include alloy, standard and edition, dimensions, temper, form, quantity, tests, certificate, inspection, packing and destination.
Can I compare alloys in the 3D builder?+
Yes. Open the builder with Brass Tubes and Pipes selected, then organise the dimensions and purchasing data for review.
Brass Tubes and Pipes enquiry
Request a quotation based on the actual requirement.
Send grade, standard and edition, dimensions, temper, quantity, tests, inspection and destination.
Manufacturing, testing, certification and delivery scope is confirmed in writing before order acceptance.