Lock the material identity
Write the UNS or EN grade and product standard on the enquiry.
Manufactured in Gujarat · India-wide supply · Export enquiries
70/30 Brass Pipes Manufacturer in India
Separate C26000 brass from copper-nickel 70/30 at the RFQ stage by stating the UNS number and governing standard.
SpecificationASTM B135 / SB135M · EN 12449GradeUNS C26000 · CuZn30 · CW505LSupply referenceDimensions and tolerances to governing standard / drawingConditionAnnealed and drawn conditions by order
Specification-led brass supply
Choose the alloy around the service, then define the order.
70/30 brass is the copper-zinc alloy commonly identified as UNS C26000 or CuZn30. It is often selected where good cold-forming behaviour and a clean finished appearance are required.
The term 70/30 is also used for copper-nickel alloys. Write C26000 brass and the finished-product standard on every enquiry, drawing and purchase order to prevent material confusion.
A clearer route to purchase
Remove uncertainty before commercial comparison.
Define manufacturable dimensions
State OD or nominal size, wall, length, tolerances and form.
Set evidence requirements
Identify MTC, examination, marking and inspection before quotation.
Configure it visually
Use the 3D builder to organise the product and purchasing data.
Technical specification
70/30 Brass Pipes reference data
Use this summary to prepare the enquiry. The accepted quotation, purchase specification and current governing-standard edition control the order.
Published ranges are enquiry references, not a live-stock promise. Confirm each size, temper, test and document in the supplier’s written quotation.
3D product configuration
Prepare a complete technical enquiry.
Open the builder with 70/30 Brass Pipes selected. Add dimensions, condition, quantity and destination, then include the governing standard, required tests and documentation in the RFQ.
Identify
Alloy, standard, edition and intended service.
Define
Dimensions, tolerance, temper, form and finish.
Approve
Tests, MTC, inspection, packing and destination.
Selection by duty
Connect the alloy to the real operating requirement.
Formed and drawn components
Temper and forming sequence selected around the component drawing.
Architectural fabrication
Finish, straightness and handling requirements agreed for visible work.
Automotive and instrument parts
Tube dimensions and subsequent processing defined before quotation.
General engineering
Material identity and acceptance tests tied to the purchase specification.
Engineering selection
Application examples do not establish fitness for service. Confirm medium, composition, velocity, temperature, pressure, fabrication, environment and governing code with the responsible engineer.
India and export enquiries
One technical page for buyers across major markets.
We review enquiries from major Indian cities and international industrial markets. Geographic coverage does not imply local inventory, office presence or certification.
01
Supply enquiries
India
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Mumbai
- Ahmedabad
- Pune
- Chennai
- Hyderabad
- Bengaluru
02
Supply enquiries
Middle East
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- UAE
- Saudi Arabia
- Qatar
- Oman
- Kuwait
- Bahrain
03
Supply enquiries
Africa
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- South Africa
- Egypt
- Nigeria
- Kenya
- Ghana
- Tanzania
04
Supply enquiries
Asia & Europe
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Singapore
- Malaysia
- Indonesia
- Philippines
- Germany
- Italy
Quality and order definition
Make acceptance criteria traceable.
State certificate type, test method, sampling or 100% examination, marking, inspection hold points and acceptance criteria before order placement.
View quality and testing capabilities →- 01
MaterialGrade, standard and edition
- 02
DimensionsSize, tolerance and length
- 03
ConditionTemper, form, finish and ends
- 04
EvidenceMTC, testing and inspection
- 05
DeliveryQuantity, packing and destination
Before requesting a quotation
Frequently asked questions about 70/30 Brass Pipes
What is 70/30 brass pipe?+
It is a copper-zinc product commonly identified as UNS C26000, CuZn30 or CW505L. State C26000 brass to distinguish it from copper-nickel 70/30.
Is C26000 the same as C27200?+
No. C26000 is commonly called 70/30 brass, while C27200 is commonly called 63/37 brass. Their chemistry and forming behaviour differ.
Which details control the quotation?+
State ASTM B135 or the required standard, UNS C26000, OD or nominal size, wall, length, temper, tolerance, quantity and documentation.
Can special sizes be reviewed?+
Yes. Send a drawing or complete dimensions and tolerances. Feasibility depends on route, tooling, condition and quantity.
70/30 Brass Pipes enquiry
Request a quotation based on the actual requirement.
Send grade, standard and edition, dimensions, temper, quantity, tests, inspection and destination.
Manufacturing, testing, certification and delivery scope is confirmed in writing before order acceptance.