Lock the material identity
Write the UNS or EN grade and product standard on the enquiry.
Manufactured in Gujarat · India-wide supply · Export enquiries
Copper-Nickel Round Bars Manufacturer in India
Specify alloy, diameter tolerance, condition, length and subsequent machining before buying copper-nickel bar.
SpecificationASTM B151 / ASME SB151GradeUNS C70600 · C71500, as specifiedSupply referenceDiameter, tolerance and length to orderConditionHot-worked · cold-drawn · annealed by requirement
Specification-led brass supply
Choose the alloy around the service, then define the order.
Copper-nickel round bars provide solid stock for machined, forged or fabricated components in C70600, C71500 and other approved grades.
ASTM B151 is a common rod and bar specification. State diameter tolerance, straightness, condition, surface, length and testing because these affect machining yield and price.
A clearer route to purchase
Remove uncertainty before commercial comparison.
Define manufacturable dimensions
State OD or nominal size, wall, length, tolerances and form.
Set evidence requirements
Identify MTC, examination, marking and inspection before quotation.
Configure it visually
Use the 3D builder to organise the product and purchasing data.
Technical specification
Copper-Nickel Round Bars reference data
Use this summary to prepare the enquiry. The accepted quotation, purchase specification and current governing-standard edition control the order.
Published ranges are enquiry references, not a live-stock promise. Confirm each size, temper, test and document in the supplier’s written quotation.
3D product configuration
Prepare a complete technical enquiry.
Open the builder with Copper-Nickel Round Bars selected. Add dimensions, condition, quantity and destination, then include the governing standard, required tests and documentation in the RFQ.
Identify
Alloy, standard, edition and intended service.
Define
Dimensions, tolerance, temper, form and finish.
Approve
Tests, MTC, inspection, packing and destination.
Selection by duty
Connect the alloy to the real operating requirement.
Machined components
Diameter allowance and condition matched to the machining route.
Marine hardware
Alloy and mechanical requirements tied to the component drawing.
Valve and pump parts
Corrosion duty, machining allowance and inspection defined before supply.
Fasteners and fabricated parts
Grade traceability and finished-component requirements preserved through processing.
Engineering selection
Application examples do not establish fitness for service. Confirm medium, composition, velocity, temperature, pressure, fabrication, environment and governing code with the responsible engineer.
India and export enquiries
One technical page for buyers across major markets.
We review enquiries from major Indian cities and international industrial markets. Geographic coverage does not imply local inventory, office presence or certification.
01
Supply enquiries
India
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Mumbai
- Ahmedabad
- Pune
- Chennai
- Hyderabad
- Bengaluru
02
Supply enquiries
Middle East
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- UAE
- Saudi Arabia
- Qatar
- Oman
- Kuwait
- Bahrain
03
Supply enquiries
Africa
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- South Africa
- Egypt
- Nigeria
- Kenya
- Ghana
- Tanzania
04
Supply enquiries
Asia & Europe
Commercial and technical supply enquiries are reviewed by grade, standard, quantity, destination and delivery term.
- Singapore
- Malaysia
- Indonesia
- Philippines
- Germany
- Italy
Quality and order definition
Make acceptance criteria traceable.
State certificate type, test method, sampling or 100% examination, marking, inspection hold points and acceptance criteria before order placement.
View quality and testing capabilities →- 01
MaterialGrade, standard and edition
- 02
DimensionsSize, tolerance and length
- 03
ConditionTemper, form, finish and ends
- 04
EvidenceMTC, testing and inspection
- 05
DeliveryQuantity, packing and destination
Before requesting a quotation
Frequently asked questions about Copper-Nickel Round Bars
Which alloys are available as copper-nickel bar?+
C70600 and C71500 are common enquiries. Confirm the exact grade, standard, diameter and condition before quotation.
Which standard covers copper-nickel round bar?+
ASTM B151 / ASME SB151 is commonly specified for copper-nickel rod and bar.
What dimensions are needed?+
State finished or stock diameter, tolerance, length, straightness, surface, machining allowance and quantity.
Can cut blanks be supplied?+
Cut lengths or blanks can be reviewed subject to diameter, tolerance, cutting allowance and quantity.
Copper-Nickel Round Bars enquiry
Request a quotation based on the actual requirement.
Send grade, standard and edition, dimensions, temper, quantity, tests, inspection and destination.
Manufacturing, testing, certification and delivery scope is confirmed in writing before order acceptance.