Quote the correct product
The page separates general copper pipe from ACR, plumbing, medical-gas and instrumentation products so the enquiry reaches the right specification.
Manufactured in Gujarat · India-wide supply · Export enquiries
Copper Pipes Manufacturer in India
Receive a copper-pipe quotation built around the grade, dimensions, standard and inspection documents your project actually requires.
Outside diameter2–250 mmWall thickness0.30–20 mmStraight lengthUp to 10 mDocumentationEN 10204 3.1
Copper piping defined by the order
Specify the grade, standard, dimensions and condition.
Indigo Metalloys manufactures copper pipes for buyers who need the material identity and finished dimensions tied to a recognised specification. The published group range covers multiple copper grades, straight outside diameters from 2 mm to 250 mm and wall thicknesses from 0.30 mm to 20 mm.
“Copper pipe” can describe different products. Plumbing tube, ACR tube, medical-gas pipe and instrumentation tube each have their own standards and preparation requirements. A reliable enquiry states the intended service, alloy, standard, OD or nominal size, wall thickness, length, temper, quantity and inspection scope.
A shorter path from enquiry to approval
Reduce uncertainty before the purchase order is issued.
Compare a defined range
Published grades, dimensions, tempers and standards give procurement teams a practical starting point before requesting availability.
Plan documentation early
Material certificates, testing and third-party inspection can be identified before commercial review, reducing avoidable order changes.
Configure the requirement visually
Use the 3D product builder to organise the product form and purchasing details, then send the configuration for technical review.
Final supply is confirmed against the accepted quotation and purchase specification.
Technical specification
Published copper pipe manufacturing range
Technical values are based on the group’s published copper-pipe range. Final availability, tolerances and testing are confirmed against the RFQ and governing standard.
Dimensions alone do not identify a standard product. State whether the requirement is industrial pipe, water tube, refrigeration tube or another application-specific product.
Standards and grade selection
Match the copper pipe to its governing specification.
Standards below appear in the group’s published range. The accepted quotation identifies the applicable edition, alloy, temper and dimensions.
ASTMB68 · B75 · B88 · B188 · B280JISH3300BS2871 Part 2 / Part 3DIN1754 · 1785 · 8905EN1057 · 12735IS / ISOIS 2501 · ISO 12449
| Grade family | Common designation | Selection context | What to state in the RFQ |
|---|---|---|---|
| Deoxidised high-phosphorus copper | DHP / commonly C12200 | General tube, water, heat-transfer and fabrication requirements where the governing standard permits | Exact UNS/designation, standard, temper and cleanliness requirement |
| Deoxidised low-phosphorus copper | DLP | Engineering applications requiring a deoxidised copper grade | Required grade equivalence and product specification |
| Electrolytic tough pitch copper | ETP | Applications where electrical and thermal conductivity requirements govern | Conductivity, temper, dimensions and testing |
| Oxygen-free high-conductivity copper | OFHC | High-conductivity or controlled-oxygen engineering requirements | Exact purity/designation, conductivity and certification |
| Tellurium copper | Machining copper grade | Components needing improved machinability, subject to the drawing and specification | Grade, drawing, finish, tolerance and quantity |
Configure before enquiring
Build a clear copper-pipe requirement in 3D.
Use the interactive product builder to select Copper Pipes, visualise the product form and organise the details required for quotation. The submitted specification remains subject to technical review and manufacturing confirmation.
Select the product
Open the builder with Copper Pipes preselected and review the tubular product form.
Define the requirement
Prepare the grade, standard, OD or nominal size, wall, length, temper and quantity.
Request technical review
Send the configured requirement with certificates, testing, inspection and destination details.
Ordering framework
Dimensions and conditions to include in your enquiry
The published manufacturing envelope is broad. Actual combinations depend on grade, process, temper, tolerance and order quantity.
Order fieldPublished range or optionsBuyer instruction
Outside diameter2–250 mmState exact OD or the nominal dimensional system
Wall thickness0.30–20 mmState nominal wall and required tolerance
Straight lengthUp to 10 mState fixed, random or cut length
Annealed conditionO60Confirm whether straight or coil supply is required
Quarter hardH01Confirm against the selected product standard
Half hardH02Confirm mechanical-property requirements
Full hardH04Confirm straightness and fabrication requirements
2–250 mm OD0.30–20 mm wallUp to 10 mO60 annealedH01 quarter hardH02 half hardH04 full hard
Service-specific selection
Copper piping for industrial and engineered systems
General engineering
Straight copper pipe manufactured to the grade, temper and dimensional specification stated by the buyer.
Water and plumbing
Type K, L, M or DWV products where ASTM B88, EN 1057 or another applicable water-tube standard governs.
Heat-transfer equipment
Copper tubular products selected for the equipment design, thermal duty and applicable product standard.
Compressed-air systems
Copper piping considered only after pressure, jointing, cleanliness and code requirements are reviewed.
Electrical and conductive parts
ETP or OFHC grades where conductivity, shape, temper and finished tolerances are defined.
Fabricated components
Pipe or tube supplied for bending, machining or assembly when the grade and condition suit the process.
Engineering note
An application name does not prove suitability. Confirm medium, pressure, temperature, joining method, corrosion conditions, design code and required approvals.
Domestic and export enquiries
Copper pipe supply enquiries from India and international markets.
Indigo Metalloys manufactures at Timbhi Village, Umbergaon, District Valsad, Gujarat. Provide the delivery city or destination country and port so packing, documentation and commercial terms can be evaluated.
IN
India-wide enquiries
Major industrial cities in India
Procurement and engineering enquiries are welcome from:
- Mumbai
- Thane
- Pune
- Ahmedabad
- Surat
- Vadodara
- Rajkot
- Jamnagar
- Delhi NCR
- Chennai
- Bengaluru
- Hyderabad
- Kolkata
- Kochi
- Visakhapatnam
- Coimbatore
EX
Export enquiries
Countries and international markets
Project and distributor requirements may be submitted from:
- United Arab Emirates
- Saudi Arabia
- Qatar
- Oman
- Kuwait
- Bahrain
- Singapore
- Malaysia
- Indonesia
- United Kingdom
- Germany
- Italy
- Netherlands
- United States
- Canada
- Australia
- South Africa
- Egypt
Locations identify markets from which enquiries may be evaluated. They do not represent a local office, stock point or guaranteed delivery time.
Copper pipe, tube and piping enquiries
Translate a broad product search into a manufacturable requirement.
Seamless copper pipe and tube
State whether the requirement is controlled by pipe or tube terminology, then provide the governing standard, grade, OD, wall and tolerances.
Industrial straight lengths
Hard-drawn copper straight pipe and industrial copper tube should be ordered with temper, length, straightness, end finish and fabrication needs.
Precision and OEM supply
For precision copper tubes or OEM components, attach drawings and identify critical dimensions, process allowances and inspection records.
Manufacturer and export enquiries
Include annual or project quantity, packing, certificate requirements, inspection scope and destination for an India or export quotation.
Application-specific tube
Use the dedicated pages for ACR, plumbing, medical gas and instrumentation requirements.
Quality and order definition
Build traceability into the purchase specification.
State the required material certificate, tests, inspection agency and marking before quotation. Available documentation and hold points are confirmed with the order.
View quality and testing capabilities →- 01
MaterialGrade, designation and governing standard
- 02
DimensionsOD, wall, length and tolerances
- 03
ConditionTemper, finish, ends and cleanliness
- 04
InspectionMTC, tests, TPI and witness points
- 05
DeliveryQuantity, packing, city, country and port
Before requesting a quotation
Frequently asked questions about copper pipes
What copper pipe sizes can Indigo review?+
The published group range covers straight-pipe outside diameters from 2 mm to 250 mm, wall thicknesses from 0.30 mm to 20 mm and lengths up to 10 m. The grade, process, temper and standard determine the combinations available.
Which copper grades are listed in the published range?+
The published range lists DHP, DLP, ETP, OFHC, DOW and tellurium copper. State the exact designation and governing standard rather than relying only on the grade family name.
Which standards can be requested?+
The group range references ASTM B68, B75, B88, B188 and B280 together with JIS H3300, BS 2871, DIN standards, IS 2501, EN 1057, EN 12735, AS/NZS 1571, GB/T 1527 and ISO 12449. Applicability is confirmed product by product.
Are EN 10204 3.1 certificates available?+
EN 10204 3.1 material certification is listed in the published range. State all documentation and inspection requirements in the RFQ so the available scope can be confirmed.
Can I configure copper pipes in the 3D product builder?+
Yes. Open the 3D product builder with Copper Pipes selected, prepare the requirement and send it for technical review.
How should I request a copper pipe price?+
Price depends on grade, standard, dimensions, temper, quantity, tests, packing and delivery destination. Send those details for a current quotation rather than relying on a generic price per metre.
Copper pipe enquiry
Get a copper-pipe quotation matched to your requirement.
Send the grade, standard, OD or nominal size, wall thickness, length, temper, quantity, certificate, inspection and destination details.
Your requirement is reviewed before the available manufacturing and documentation scope is confirmed.